Starting The Projector With A Password - Epson PowerLite 737c User Manual

Fine-Tuning the Projector
116
The countdown for the elapsed time begins as soon as you close
the Password Protect menu. (You can check the elapsed time in
this menu next to
10. To enable your screen logo, select
. Select and press
Enter ON
When this feature is on, the logo appears whenever you turn on
the projector (if the
menu; see page 117). It also appears when you press the A/V
Mute button (if you selected the
in the Extended menu). None of the User's Logo features in the
Extended menu can be changed when the User's Logo Protect
function is enabled.

Starting the Projector with a Password

When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the button on the remote control and use the
Num
numeric keypad to enter the four digit password.
The password screen closes, the numeric keypad is automatically
deactivated, and projection begins.
If the password is not correct, you see the message
If you enter an incorrect password three times in
Please try again.
succession, you see the message
locked. Request code xxxxx
mode for approximately 5 minutes. Write down the request code.
Then disconnect the projector's power cord from the electrical outlet,
reconnect it, and turn the projector back on.
.)
Time elapsed
User's Logo Protect
.
Enter
is enabled in the Extended
Startup Screen
as the Background Color
Logo
The projector's operation will be
and the projector switches to standby
and press
Wrong password.