Registering Your Projectors
Before you can monitor your projectors, follow these steps to register
them:
1. Click
Start > Programs
or click the
EMP Monitor
see this screen:
2. Click
Register projector
3. Click
Auto detect
network. Or click
network IP address.
or
All Programs > Epson Projector >
EMP Monitor
Click here
. You see this screen:
to locate projectors currently operating on the
Manual registration
icon in the taskbar. You
Click here
and enter the projector's
note
If Auto detect fails to find
the projector, your projector
may not be connected or
configured correctly for the
network. See page 52 to
configure the projector for a
wireless network.
Managing Projectors
123