Epson PowerLite 737c User Manual page 120

note
If Direct Power ON is
enabled, the power cable is
connected, and a power
outage occurs, the projector
will start when the power is
restored.
Fine-Tuning the Projector
120
Projection
Select (to project from the front of a screen and right side
Front
up), (when the projector is mounted upside-down
Front/Ceiling
from the ceiling),
Rear
transparent screen), or
a transparent screen when the projector is mounted upside-down
from the ceiling).
Operation
Enable
Direct Power ON
when the power cable is connected (without pressing the
button). Enable
Sleep Mode
turn off automatically if it is idle (and no signal is received) for 30
minutes.
Standby Mode
Select to enable the projector to be monitored over
Network ON
a network when it is in standby mode (the power light is orange).
Link 21L
Enable this setting if you want to be able to control the projector
from a USB-connected computer.
Language
Select from nine languages to be used for the projector menus.
(to project from behind onto a
(to project from behind onto
Rear/Ceiling
if you want to have the projector start
if you want to have the projector
Power