Starting The Projector With A Password - Epson PowerLite 1725 User Manual

6. Hold down the
Num
numeric keypad to enter a four digit password. (The default
setting is 0000.)
7. When you see a confirmation message, reenter the password.
Then press the
Menu
8. To enable your screen logo, select
. Select and press
Enter On
When this feature is on, the logo appears whenever you turn on
the projector (if the
menu; see page 108). It also appears when you press the
button (if you selected the
A/V Mute
setting under Display in the Extended menu). None of the User's
Logo features in the Extended menu can be changed when the
User's Logo Protect function is enabled.
9. To enable network setting protection, select
and press . Select
Enter
When this feature is on, none of the network settings on the
Configuration menu can be changed.

Starting the Projector with a Password

When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the button on the remote control and use the
Num
numeric keypad to enter the four digit password.
The password screen closes, the numeric keypad is automatically
deactivated, and projection begins.
button on the remote control and use the
button to exit the screen.
User's Logo Protect
.
Enter
is enabled in the Extended
Startup Screen
Logo
and press
On Enter
and press
for the
A/V Mute
Network Protect
.
Fine-Tuning the Projector
107