Solving Easymp Problems - Epson PowerLite 737c User Manual

Solving Problems
164
If you're using Access Point mode and you're connecting to the
wrong network, you may be experiencing signal interference from
another network. Try resetting your access point or base station,
then restart NS Connection.
If you're using AirPort, the projector's ESSID should match the
AirPort network name, not the name of the AirPort base station.
To check the network name, start the AirPort Admin utility,
select your base station, and click
. The network name appears on the AirPort tab.
All Settings
If you're prompted for a password when you connect, enter the
WEP encryption key (if you're using WEP encryption).
Try connecting using IP Connect Mode; see page 80.

Solving EasyMP Problems

An image displayed with EasyMP appears distorted.
Because of their resolution, some JPEG images cannot be displayed
correctly. Some JPEG files from digital cameras cannot be previewed.
Files with a high compression ratio may appear blurry.
In EMP SlideMaker 2, PowerPoint files don't appear in the
file window.
EMP SlideMaker 2 does not support PowerPoint 95 or 97. Files
created in these versions of PowerPoint must be opened and resaved in
PowerPoint 2000 or later.
In EMP SlideMaker 2, your PowerPoint files don't display
thumbnails and can't be pasted into scenarios.
Make sure the MS Office JPEG converter has been installed. Run the
Office installer, display the
install the JPEG filter. Also, make sure PowerPoint is installed on the
computer you're using to build the scenario.
. Then click
Configure
Converters and Filters
Show
option, and