Epson PowerLite 737c User Manual page 102

note
If more than one scenario is
set to run automatically,
they will play in the order
listed on this screen.
Presenting from a Memory Card, Digital Camera, or External Drive
102
Once the scenario is transferred, you see this message about your
scenario's autorun setting:
The autorun setting means that the scenario will start playing
whenever the projector is turned on (with the memory card in the
projector).
7. Do one of the following:
If you don't want the scenario to run automatically, click
. Skip to step 11 to remove the card and insert it in
Cancel
the projector.
If you want it to run automatically, click
with the following instructions.
You see the Edit Autorun window:
8. To set a scenario to run automatically, select it from the list on the
left side of the screen and use the
the list on the right.
9. Click the box if you want your scenario to repeat
Revive
continuously. Clear the checkbox if you want it to play only once.
and continue
OK
arrow button to move it to