Table of Contents
Advertisement
5. Hold down the
Num
a four digit password.
6. When you see a confirmation message, reenter the password.
7. Press the
button, then press
Menu
8. Turn off and unplug the projector.
Starting the Projector With a Password
When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the
button and use the numeric keypad to enter the
Num
four digit password.
The password screen closes and projection begins.
button and use the numeric keypad to enter
Hold down
to exit the screen.
Enter
Hold down
note
If you leave the projector
plugged in, the Password
screen will not appear. It
appears only if you unplug
and reconnect the power
cord.
Fine-Tuning the Projector
65
Advertisement
Table of Contents
