Epson PowerLite 737c User Manual page 58

note:
If you don't need the other
network port
configurations, disable
them by deselecting their
checkboxes. If more than
one network port is
enabled, the projector
software warns you to
turn off AirPort when you
first connect the projector.
Disregard this message.
Presenting Through a Wireless Network
58
3. Make sure Location is set to
Select
Automatic
Select Network Port
Configurations
then select AirPort
4. Select
Network Port Configurations
menu.
5. Under Port Configurations, select
6. Click
Apply Now
7. Click the AirPort icon on the menu bar at the top of the
Macintosh desktop. You see the AirPort status menu:
Choose the ESSID
you assigned to the
projector
8. Check to make sure AirPort is turned on.
9. Select your projector's ESSID.
.
Automatic
in the Show pull-down
AirPort
. Then close the window.
.