Epson PowerLite 737c User Manual page 54

note
The projector keyword
changes each time you turn
the projector off and then on
again, or remove and
reinsert the 802.11g card.
Check the keyword on the
EasyMP Network screen
whenever you start EasyMP
and enter that keyword on
your computer. You can't
connect using a previous
keyword.
It is recommended that the
keyword setting is changed
periodically.
Presenting Through a Wireless Network
54
character position. When you're done typing the new name, press
.
Enter
5. If your network card supports an SSID or ESSID name (see
page 57), highlight the
name of your ad hoc network. When you're done, press
Note that the ESSID is case-sensitive (if you enter the name in
uppercase on the projector, you must type it the same way on the
computer connecting to the projector).
6. If you want to create a password for remote access to the
projector, highlight the
press , and enter a password of up to 8 alphanumeric
Enter
characters. When you're done, press
7. If you want to set up a security keyword so that only people who
are in the same room as the projector can access it, turn
on. Then when you want to connect to the projector, it
keyword
displays a randomized four-digit number or "keyword" on the
screen. When prompted by NS Connection, you can enter the
keyword on your computer to connect (see page 77).
8. When you're done making these settings, highlight the
at the top of the screen (you can either press the
remote control or use the
press . Highlight the
Enter
return to the main EasyMP Network Screen.
Now you're ready to set up your computer for wireless projecting.
Go to "Configuring the Network Settings for Windows" below, or
"Setting Up Your Macintosh for Ad Hoc Mode" on page 57.
text box, press
ESSID Enter
Password for WEB control
.
Enter
pointer button to highlight it), then
button again and press
OK
, and enter the
.
Enter
checkbox,
Projector
button
OK
button on the
to
Enter