Adjusting Signal Settings - Epson PowerLite 737c User Manual

Brightness
Lightens or darkens the overall image.
Contrast
Adjusts the difference between light and dark areas.
Color Intensity (video only)
Adjusts the color depth of the image.
Tint (video only)
Adjusts the balance of green to magenta in the image
(available only for component video or NTSC signals).
Sharpness
Adjusts the sharpness of the image.
Color Adjustment
Adjusts the color temperature. Select
temperature between 5000 and 10000 °K. Or select
adjust individual red, green, and blue values. (Not available if
is selected as the Color Mode setting.)
sRGB

Adjusting Signal Settings

Although the projector normally detects and optimizes the input
signal automatically, you can use the Signal menu to make manual
adjustments. In addition to changing the position of the projected
image, you can correct tracking and sync for computer images, or
change the aspect ratio to widescreen format for video images.
1. Press the button and select the
Menu
You see a screen similar to one of those below. (The settings will
be different depending on the source you are projecting from.)
Computer/RGB Video
to set a
Color Temp.
RGB
menu.
Signal
Component Video
note
The
Brightness
changes the opacity of the
projector's LCD panels. You
can also change the lamp's
brightness. Select
Brightness Control
Setting menu, then choose
or (the default
High Low
setting is ).
High
to
note
You can also use the remote
control's button to
Auto
automatically reset the
projector's tracking, sync,
resolution, and position
settings. See page 26 for
details.
Composite Video/S-Video
Fine-Tuning the Projector
setting
in the
111