Solving Problems With The Image Or Sound - Epson PowerLite 737c User Manual

Solving Problems
156
Solving Problems with the Image
or Sound
No image appears on the screen.
Check that the
Power
cap is off.
The projector may be in standby or sleep mode. If the
light is orange, press the P
on.
If the power was switched off and then on again, the projector
may be cooling down. Wait until the
and remains orange; then press the P
Press the
A/V Mute
the picture has not been turned off temporarily.
The attached computer may be in sleep mode or displaying a
black screen saver. Try pressing a key on the computer.
If you are projecting from a DVD player or other video source,
make sure you turn it on and press its
You've connected a computer and see a blue screen with the
message displayed.
No Signal
Make sure the cables are connected correctly, as described on
page 38.
Try restarting your computer.
If you've connected a computer and one or more video sources,
you may need to press the
projector or one of the source buttons on the remote control to
select the correct source. Allow a few seconds for the projector to
sync up after pressing the button.
light is green, not flashing, and the lens
button to turn the projector
Power
Power
Power
button on the remote control to make sure
Play
Source Search
Power
light stops flashing
button again.
button.
button on the