Adding Leap Authentication - Epson PowerLite 737c User Manual

3. When you're done making settings, highlight the
the top of the screen and press

Adding LEAP Authentication

When you click the
Security
this screen:
1. Highlight , then press
LEAP
2. Enter the user name and password that match the settings on your
authentication server:
Highlight the
turns yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in
alphabetical order, or down to select letters in reverse order;
then press the
next character position. When done typing the user name,
press .
Enter
Highlight the
turns yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in
alphabetical order, or down to select letters in reverse order;
.
Enter
button on the Network screen, you see
.
Enter
text box and press
User name
pointer button to the right to move to the
text box and press
Password
button at
OK
note
If you want to enter a blank
. The box
Enter
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, use the numeric
keypad while holding down
the
remote control. Press the
. The box
Enter
Num
numeric keypad mode.
Presenting Through a Wireless Network
button on the
Num
button again to exit
73