Starting The Projector With A Password - Epson PowerLite 62c User Manual

The countdown for the elapsed time begins as soon as you close
the Password Protect menu. (You can check the elapsed time in
this menu next to
4. To enable your screen logo, select
. Select and press
Enter ON
When this feature is on the logo appears whenever the projector is
turned on (if the
Startup Screen
menu; see page 62) and as the A/V Mute screen (if you selected
the as the
Logo Background Color
None of the User's Logo features can be changed when the User's
Logo Protect function is enabled.
5. Press to close the Password Protect menu.
Menu
If you lose the remote control, you will not be able to enter the
password, so keep the remote control in a safe place at all times.
When the period defined in the Time-elapsed setting has passed, and
the password is entered correctly, the elapsed time will be reset to
and the countdown will start again. Remember to disable or change
this setting when you need to.

Starting the Projector with a Password

When the password function is enabled, you see this screen when you
turn on the projector:
Press down the button on the remote control as you use the
Num
numeric keypad buttons to enter the password. Once you have
entered the password correctly, the password screen closes, and
projection begins.
.)
Time elapsed
User's Logo Protect
.
Enter
is enabled in the Extended
in the Extended menu).
and press
0
Fine-tuning the Projector
69