Starting The Projector With A Password - Epson PowerLite 260D User Manual

When this feature is on the logo appears whenever the projector is
turned on (if the
Startup Screen
menu; see page 61) and as the A/V Mute screen (if you selected
the as the
Logo Display Background
menu). None of the User's Logo features can be changed when
the User's Logo Protect function is enabled.
4. Press to close the Password Protect menu.
Menu
If you lose the remote control, you will not be able to enter the
password, so keep the remote control in a safe place at all times.
You can attach the password protect sticker to the projector as an
additional theft deterrent.

Starting the Projector With a Password

When the password function is enabled, you see this screen when you
turn on the projector:
Use the numeric buttons on the remote control to enter the password.
Once you have entered the password correctly, the password screen
closes, and projection begins.
If the password is not correct, you see the message
If you enter an incorrect password three times in
Please try again.
succession, you see the message
locked. Request code xxxxx
mode for approximately 5 minutes. Write down the request code.
Then disconnect the projector's power cord from the electrical outlet,
reconnect it, and turn the projector back on.
When you see the Password Protect Release screen again, you can try
to enter the correct password.
is enabled in the Extended
setting in the Extended
Wrong password.
The projector's operation will be
and the projector switches to standby
Fine-tuning the Projector
69