Epson PowerLite 737c User Manual page 130

note
To enter numbers with the
remote control, hold the
button and use the
Num
numeric keypad. Press the
button again to exit
Num
numeric keypad mode.
Managing Projectors
130
You see the following screen:
6. For Mail Notification Settings, select
7. Highlight the
IP address of SMTP server
The box turns yellow to indicate you are in input mode. You can
enter numbers between 0 and 255. However, you cannot use the
following IP addresses: 255.255.255.255, 224.0.0.0, or 127.x.x.x
(where x is a number between 0 and 255).
8. Highlight the
Port Number
SMTP server port number. The default value is 25, but you can
enter numbers between 1 and 65535.
9. Highlight the
Destination address 1
the e-mail address for the first computer that you want to receive
e-mail alerts. You can enter a maximum of 53 single-byte
alphanumeric characters.
Use the pointer button on the remote control to enter letters.
Press the top of the button to scroll through capital letters, and
the bottom of the button to scroll through lowercase letters. You
will also see punctuation marks, such as a period (.) and symbols,
such as @. When you see the letter or symbol you want, press
. Then press the right side of the button to move to the next
Enter
position. To correct a mistake, press the left side of the button to
return to the previous position.
and press
ON
box and press
box and press . Then enter the
Enter
box and press
.
Enter
.
Enter
. Enter
Enter