Epson PowerLite 737c User Manual page 53

2. To select , press the
Config
3. Highlight under
Basic
You see the following screen:
Easy connect
mode
Make sure
Easy connect mode
If not, use the pointer button on the remote control to
highlight the checkbox next to
to select it.
Enter
4. Make sure the projector has a unique name, so you can identify it
when connecting to it from your computer.
If you need to rename it, highlight the
then press . The text box turns yellow to indicate you are in
Enter
input mode.
Press the pointer button up to select individual letters in
alphabetical order, or down to select letters in reverse order; then
press the pointer button to the right to move to the next
button on the remote control.
Enter
and press
Wireless LAN
is selected, as shown above.
Easy connect mode
Projector name
.
Enter
, then press
note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, use the numeric
keypad while holding down
the
remote control.
text box
Presenting Through a Wireless Network
button on the
Num
53