SECTION 8 - MICROPANEL
Figure 61 - Print key
Print key operation
The PRINT key is used to initiate a printout of cur-
rent operating data (real time data), a complete history
printout of all history (fault) buffers, a printout of all
normal shutdowns (compressor cycling, chiller shut-
down, and so on), or history (fault) data printout of a
specific fault. History Buffer 1 will always be the most
recent fault history printout. Printing may also be can-
celed by selecting the CANCEL PRINTING option.
The following message is displayed when the PRINT
key is pressed.
PRINT CHOOSE PRINT REPORT
◄ ►
XXXXXXXXXXXXXXXXXXXXX
After pressing the PRINT key, the printout type is
selected by pressing the ◄ (LEFT ARROW) or ►
(RIGHT ARROW) keys until the preferred printout is
displayed.
156
Print key
The following table shows the available printout types.
Table 27 - Printout types
The specific printout is initiated by pressing the
(ENTER) key.
Form 201.47-ICOM1
Issue date: 17/11/2022
Print key
LD10605
Printout types
Operating Data
(Default Selection)
All History Buffers
Normal Shutdowns
History Buffer 1
History Buffer 2
History Buffer 3
History Buffer 4
History Buffer 5
History Buffer 6
History Buffer 7
History Buffer 8
History Buffer 9
History Buffer 10
Cancel Printing
JOHNSON CONTROLS