Table of Contents
Advertisement
2.3. Built-in Mounting
The built-in mounting is designed for iRIS4 panel box and it is applied in 25mm thick drywalls. The built-in mounting is
performed with special kit containing: metal base, metal decorative frame and set of fixing elements – Figure 6.
Metal base
Elements' description:
1 - Ventilation holes
2 - Holes for cable running
3 - Hole for main power supply cable running
4 - Mounting holes to the 25mm thick drywall
5 - Mounting holes for iRIS4 metal bottom
6 - Metal strips for joining the frame to the box bottom of iRIS4
7 - Holes M4 for fixing the frame to the box bottom of iRIS4
•
Cut a mounting hole in the drywall at the place of installation.
•
Insert the metal base in the mounting hole and fix it to the drywall with the screws.
The mounting hole in the drywall must be a little greater
than the dimensions of the metal base.
iRIS4 - Addressable Fire Alarm Panel – Installation Manual
Metal frame – front side
Figure 6
Use the screws M4x40 (DIN7985) and washers M4
ø12mm (DIN 522) for fixing the up and bottom corners.
Use the screws M4x30 (DIN 965) for fixing the base in the
middle.
Figure 7
11
Metal frame – back side
Set of fixing elements:
4 pcs - Screw M4x40, DIN7985
4 pcs - Washer M4 DIN 522, ø12mm
2 pcs - Screw M4x30, DIN 965
6 pcs - Screw M4x12 DIN 966
Advertisement
Table of Contents
