3. If you are not satisfied with the results, use the d/u buttons to enter an adjustment
value.
4. Press the Z button when settings are complete.
Once the feed amount has been adjusted, printing will continue at the new value.
Note:
The new value is erased when:
❏ The media loading lever is raised
❏ The printer is turned off
❏ Changes are made to Feed Adjustment in the Media Setup menu.
Printable area
The gray area in the illustration below shows the printable area. The arrow indicates the
feed direction.
The positions of items 1 to 2 are as follows:
81
Basic Operations