Chapter 2 Basic Operations; Loading And Exchanging Media; Loading Media - Epson SureColor S30670 User Manual

Chapter 2
Basic Operations

Loading and Exchanging Media

Loading Media

The procedure for loading media varies depending on whether you are using the installed
media feeding unit or the optional heavy roll media system.
Follow the steps below when using the supplied media feeding unit.
When the Heavy Roll Media Feeding Unit is installed, see "Using the Optional Heavy Roll
Media Feeding Unit" on page 41.
When the Standard Media Feeding Unit Is Installed
This section describes how to load media when the standard media feeding unit is
installed.
Caution:
c
❏ Because the media is heavy, it should not be carried by one person. When loading or
removing the media, use at least two persons.
❏ The heaters and media holding plates may be hot; observe all necessary precautions.
Failure to observe the necessary precautions could result in burns.
❏ Be careful not to trap your hands or fingers when opening or closing the front cover.
Failure to observe this precaution could result in injury.
Important:
Load media immediately before printing. The pressure rollers may crease media left in
the printer. The media may also become wavy or curled, causing jams or resulting in the
media coming into contact with the print head.
Note:
For information on the media that can be used in the printer, see "Supported Media" on page
144.
31
Basic Operations