Epson SureColor S30670 User Manual page 125

Item
Media End Check
Media Skew Check
Auto Nozzle Check
Nozzle Check
Cycle
Options When
Clogged
Print Nozzle Pattern
Parameter Explanation
On Choose whether the printer automatically detects (On)
or does not automatically detect (Off), the end of the
Off
media. Try Off if the printer displays Media Out when the
media is correctly loaded. We generally recommend to
operate with this setting set to On.
On When skewed media is detected, the printer will either
stop printing and display an error (On) or continue
Off
printing (Off). On is recommended in most
circumstances, as skewed media may cause the printer
to jam.
Off Choose the frequency with which the printer performs
an Auto Nozzle Check: never (Off) or once every 1 to 10
1 to 10 pages
pages. Auto nozzle checks will not be performed while
Off is selected. If 1 to 10 is selected, the printer will
automatically checks for clogs at the specified interval
by scanning a test pattern with a sensor as it is being
printed.
Note that Auto Nozzle Check is not capable of
detected all types of clog. In addition, Auto Nozzle
Check is not available under the following conditions:
❏ The media is transparent or colored.
❏ The printer is exposed to direct sunlight or
interference from other ambient light sources.
Shade the printer from sources of interference.
❏ 2.5 is selected for Platen Gap in the setup menu.
Choose another option for Platen Gap.
Continue Choose how the printer responds when an auto nozzle
Printing check detects clogged nozzles.
If Continue Printing is selected, the printer will display
Stop Printing
Nozzle Clog Detected but keep printing. Perform head
cleaning if you judge it necessary on inspecting the print
results.
If Stop Printing is selected, the printer will display Nozzle
Clog Detected and pause printing. Inspect the print
results and choose whether to resume or suspend
printing according to the extent of the clog.
Off Choose the frequency with which the printer prints a
nozzle test pattern: never (Off) or once every 1 to 10
1 to 10 pages
pages. Periodic test patterns will not be printed while Off
is selected. To print a test pattern at the top of every 1 to
10 pages, select an option between 1 and 10. When
printing is complete, you can visually inspect the pattern
to determine whether there may be faint or missing
colors in the preceding or following printout.
Using the Control Panel Menu
125