The Printer Sounds Like It Is Printing, But Nothing Prints - Epson SureColor S30670 User Manual

You cannot print under the network environment.
Are the network settings correct?
o
Ask your network administrator for the network settings.
Connect the printer directly to the computer using a USB cable, and then try to print.
o
If you can print via USB, there are some problems on the network environment. Ask your system
administrator, or refer to the manual for your network system. If you cannot print via USB, see the
appropriate section in this User's Guide.
The printer has an error.
Confirm if errors have occurred in the printer by checking the lights and messages on the printer's
o
control panel.
See "Control panel" on page 15 and "When a Message is Displayed" on page 131.

The printer sounds like it is printing, but nothing prints

The print head moves, but nothing prints.
Confirm the printer operation.
o
Print a test pattern. Test patterns can be printed without connecting the printer to a computer
and hence can be used to check printer function and status. See "Checking for clogged
nozzles" on page 85.
Refer to the following section for information on what to do if the pattern does not print correctly.
Is the message Motor Self Adjustment displayed on the control panel's screen?
o
The printer adjusts the internal motor. Wait for a while without turning off the printer.
Test Pattern Does Not Print Correctly
Perform head cleaning.
o
The nozzles may be clogged. Print a test pattern again after performing head cleaning.
See "Head Cleaning" on page 87.
Has the printer been left unused for a long time?
o
If the printer has not been used for a long time, the nozzles may have dried up and have been
clogged. Steps to take when the printer has not been used for a long time. See "Notes when not
using the printer" on page 24.
135
Problem Solver