Epson SureColor S30670 User Manual page 115

Menu Item
Media Setup Media Remaining
See "The Media
Setup Menu" on
page 118.
Select Media
Customize Settings
Remaining Setup
Length
Remaining Alert
Print Remaining Length
Current Settings
RIP Settings
Platen Gap
Head Alignment
Input thickness.
Roll Type
Tension
Measurement
Media Tension
1 to 30 (media setting bank)
Setting Name
Feed Adjustment
Platen Gap
Head Alignment
Heating & Drying
Heater
Temperature
Drying Time Per
Pass
After Heater
Feed
Additional Dryer
Parameter
On, Off
5.0 to 99.5 m (15 to 300 ft)
1 to 15 m (4 to 50 ft)
Print
RIP Settings, 1 to 30 (media setting bank
number)
Change settings for currently selected media.
The options available depend on whether RIP
Settings or a media setting bank is selected.
The options available for RIP settings and
media setting banks 1 to 30 are listed below.
1.5, 2.0, 2.5
Auto(Uni-D), Auto(Bi-D), Manual(Uni-D),
Manual(Bi-D)
Printable Side Out, Printable Side In
Periodically, Every Page, Off
0 to 40
Up to 22 half-size characters
Auto, Manual
1.5, 2.0, 2.5
Auto(Uni-D), Auto(Bi-D), Manual(Uni-D),
Manual(Bi-D)
Pre-heater/platen heater: 30 °C to 50 °C (86 °F
to 122 °F)
After heater: 30 °C to 55 °C (86 °F to 131 °F)
0 to 10 sec
Mode 1, Mode 2, Off
On, Off
Using the Control Panel Menu
115