Epson SureColor S30670 User Manual page 126

Item
Periodical Cleaning
Cleaning Cycle
Heat Off Timer
Restore Settings
Parameter Explanation
Off Choose the frequency with which the printer performs
head cleaning: never (Off) or after 1 to 24 hours.
1 to 24 hours
Periodic head cleaning will not be performed while Off is
selected. If a value between 1 and 24 hours is selected,
auto head cleaning will be performed after the
specified number of hours. If printing is in progress or the
printer is in sleep mode when the specified time has
elapsed, Periodical Cleaning will only be performed
after printing is complete or the printer is reactivated.
The following reset the timer:
❏ Turning the printer on.
❏ Choosing another option for this item.
❏ Manually performing head cleaning using All
Nozzles.
Note that even when Off is selected for Periodical
Cleaning, the printer will automatically clean the print
head at a fixed interval after printing to keep the nozzle
from clogging.
Off Choose the frequency with which the performs auto
head cleaning: never (Off) or once every 1 to 10 pages.
1 to 10 pages
Head cleaning will not be performed while Off is
selected. Select 1 to 10 to perform head cleaning
before the specified number of pages is printed.
15 to 240 You can turn off the heaters automatically when no
minutes errors are detected and no print jobs are in progress. This
option is used to choose the interval before the heaters
turn off automatically.
The printer will enter sleep mode when the Heat Off
Timer expires. In sleep mode, the control panel turns off
and the internal motors and other components
consume less power. If an optional additional print
drying system is installed, it will turn off automatically.
To reactivate the control panel display, press any button
in the control panel except P. The control panel display
will however turn off again if no operations are
performed for another 30 seconds under these
conditions. The printer and heaters are only fully
reactivated when a print job is received, the media
loading lever is used, or another operation involving
printer hardware is performed.
Yes Select Yes to restore all items in the Printer Setup menu to
their default settings.
No
Using the Control Panel Menu
126