Replacing Ink Cartridges - Epson SureColor S30670 User Manual

Component to be
replaced
1 Flushing pad
2 Wiper
3 Wiper cleaner
4 Waste ink bottle
Note: Order maintenance kits (T724100) once the contents of the supplied maintenance kit are exhausted.
Note: Use ink cleaner (T699300) for stains that can not otherwise be removed.

Replacing Ink Cartridges

If one of the installed ink cartridges is expended, printing cannot be performed. If an ink low
warning is displayed, we recommend replacing the ink cartridge(s) as soon as possible.
If an ink cartridge runs out while printing, you can continue printing after replacing the ink
cartridge. However, when replacing ink during a print job, you may see a difference in color
depending on the drying conditions.
For a list of supported ink cartridges, see "Options and Consumable Products" on page
143.
The procedure below can also be used to replace cleaning cartridges for print head
washing.
Cleaned on date
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
Explanation
❏ We recommend that this
/ /
component be replaced once
/ /
every six months.
❏ Replace when ink stains appear
/ /
on the media or when dust or
/ /
lint from the media appear on
the front of the flushing pad.
❏ We recommend that this
/ /
component be replaced once
/ /
every six months.
❏ Replace when the front of the
/ /
wiper cleaner (the absorbent
/ /
parts) start to get stained with
ink.
/ /
❏ Replace the wiper when
/ /
replacing the wiper cleaner.
/ /
/ /
❏ Place a new waste ink bottle
/ /
when waste ink reaches the line
/ /
on the current waste ink bottle.
❏ After replacing the bottle, reset
/ /
the waste ink counter.
/ /
110
Maintenance