Before Printing - Epson SureColor S30670 User Manual

3. Loosen the left roll core holder fixing screw and remove the roll core holder from the roll.
4. Loosen the right roll core holder fixing screw and remove the roll core holder from the
roll.

Before Printing

To maintain print quality, perform the following inspection before starting work each day.
❏ Check the amount of ink remaining:
If ink is expended during printing, printing can be resumed once the affected cartridge
has been replaced. Note, however, that depending on how much the ink has dried,
replacing ink during printing may cause apparent changes in hue. If you know that the
print job will be a large one, we recommend that you use new cartridges to replace
those that are running low before you start. The old cartridges can be reinserted and
used at a later date.
Ink level is shown by an icon. See "Understanding the Display" on page 18.
If you need to replace cartridges, see "How to replace" on page 111.
❏ Print Check Pattern
65
Basic Operations