Epson SureColor S30670 User Manual page 64

7. Lower the roll onto the roll support.
Using the Optional Heavy Roll Auto Take-up Reel Unit
This section explains how to remove media from the take-up reel using a lifter.
The following types of lifter can be used.
❏ Fork or platform thickness: 28 mm (1.1 inches) or less
❏ Fork or platform can be lowered to approx.190 mm (7.5 inches) from the floor.
Caution:
c
Because the media is heavy, it should not be carried by one person. When loading or
removing the media, use at least two persons.
Using a lifter is recommended when handling a media that is 40 kg (88 lb) or heavier.
1. Cut the media and roll the cut end onto the take-up reel. See "Cutting Media" on page
53.
2. Insert the lifter between the media and the auto take-up reel unit and adjust the height
to support the take-up roll.
64
Basic Operations