Customize Settings - Epson SureColor S30670 User Manual

Item
Print Remaining
Length
Select Media
Parameter
RIP Settings
1 to 30 (media setting bank number)

Customize Settings

Item
Current Settings
RIP Settings
Item
Platen Gap
Head Alignment
Parameter Explanation
Print Use Print Remaining Length to print the amount of media
remaining on the current roll before replacing it with
another type of media. You can then enter this number
as the media length the next time the roll is used.
Explanation
Choose the media settings used for printing.
If RIP Settings is selected, the media settings selected in
the software RIP will be used.
Select a number between 1 and 30 to use the settings in
the corresponding media setting bank. Use Customize
Settings to create media setting banks.
Parameter Explanation
Change settings for currently selected media. The
options available depend on whether RIP Settings or a
media setting bank is selected. More information on the
options available can be found below in the entries for
RIP Settings and media setting banks 1 to 30.
Parameter Explanation
1.5 Change Platen Gap (the gap between the print head
and the media) for the media setting bank selected in
2.0
the software RIP.
2.5 The default setting of 1.5 is recommended in most
situations. Choose 2.0 if printout is scratched or
smudged.Select 2.5 only if print results are still smudged
when 2.0 is selected. Choosing a larger gap than
required may result in ink stains inside the printer,
reduced print quality, or shorter product life.
Using the Control Panel Menu
119