Epson SureColor S30670 User Manual page 123

Item
Head Movement
Multi-Strike Printing
Roll Type
Tension
Measurement
Media Tension
Feed Speed
Print Media List
Parameter
Print
Parameter Explanation
Data Width Choose the range in which the print head moves during
printing.
Printer Full Width
Data Width restricts print head movement to the printed
area. Restricting the extent of print head movement
increases print speed.
If Printer Full Width is selected, the print head will move
the full width of the largest media supported by the
printer. Select this option for more even print results with
less variation.
Off Choose the number of times each line is printed.
2 to 8
Printable Side Out Choose Printable Side Out or Printable Side In according
to how the media is rolled.
Printable Side In
Periodically Choose Periodically or Every page to have the printer
automatically monitor and adjust media tension during
Every page
printing for optimal results, Off to disable automatic
tension adjustment. Periodically is recommended in
Off
most circumstances. The printer may however be
unable to adjust tension appropriately for some media,
resulting in excessive slack or other maladjustments that
cause printing problems, in which case you should
select Off. Note, however, that Off may result in
unusually large margin between pages. In addition,
printing may not stop and the inside of the printer may
become stained. Observe the following precautions:
❏ Do not print at the end of a roll
❏ Do not select Off for Media End Check.
Select Every page for more precise tensioning, but note
that print times will increase.
0 to 40 Increase tension if creases appear in the media during
printing. The higher the value, the greater the tension.
1 to 2 Choose a slower feed speed if thin media is creased or
torn or sticks together during printing. The lower the
value, the slower the speed.
Explanation
Print the contents of media setting banks 1 to 30.
Using the Control Panel Menu
123