Understanding the Display
1 Messages
Displays the printer's status, operation, and error messages.
See "When a Message is Displayed" on page 131.
2 Heater temperature
From left to right, this display shows the temperature settings for the pre-heater, platen
heater, and after heater. The thermometer icons give a rough indication of the current
temperatures of the heaters.
:
The heater has reached the selected temperature.
:
The heater has not reached the selected temperature.
3 Media info
❏ From left to right, this display shows the selected media, platen gap, media width, and
media remaining.
❏ If a media setting bank number created with this printer is selected as the print media,
the number (from 1 to 30) will be displayed. When RIP Settings is selected, 0 will be
displayed.
❏ The selected platen gap is shown as follows.
:
:
:
❏ The media remaining is not displayed if Off is selected for Remaining Setup in the Media
Remaining menu.
See "The Media Setup Menu" on page 118.
1.5
2.0
2.5
18
Introduction