Printer Setup Menu - Epson SureColor S30670 User Manual

Printer Setup Menu

indicates default settings. For more information on margins and media size, see
"Printable area" on page 81.
Item
Side Margin(Right)
Side Margin(Left)
Print Start Position
Media Size Check
Parameter Explanation
3 to 25 mm Choose the width of the right margin when media is
(0.12 to 1.00 loaded in the printer. The position from which the margin
inch) is measured varies with the option selected for Media
Size Check.
On selected for Media Size Check: The right edge of the
media.
Off selected for Media Size Check: The default right
edge reference position (as far as the platen past the
center of the label on the pre-heater).
3 to 25 mm Choose the width of the left margin when media is
(0.12 to 1.00 loaded in the printer. The position from which the margin
inch) is measured varies with the option selected for Media
Size Check.
On selected for Media Size Check: The left edge of the
media.
Off selected for Media Size Check: 64 inches from the
right edge reference position.
0 to 800 mm Adjust this parameter if you want to print from the near
(0.00 to 32.00 center of the media or if you want to shift the printed
inch) area left from the Side Margin(Right) setting. The area
between the right edge of the media and Print Start
Position is left blank. If a value is selected for Side
Margin(Right), an additional area corresponding to the
width selected for Side Margin(Right) will be left blank.
The position from which the this parameter is measured
varies with the option selected for Media Size Check.
On selected for Media Size Check: The right edge of the
media.
Off selected for Media Size Check: The default right
edge reference position (as far as the platen past the
center of the label on the pre-heater).
On Choose whether the printer automatically detects (On),
or does not automatically detect (Off), the edges of the
Off
media. Try Off if the printer displays a Media Size Error
when the media is correctly loaded. Note, however,
that the printer may print beyond the edges of the
media when Off is selected. Ink used outside the edges
of the media will stain the inside of the printer. We
generally recommend to operate with this setting set to
On.
Using the Control Panel Menu
124