The Printer Setup Menu - Epson SureColor SC-F9330 Series User Manual

SC-F9300 Series User's Guide
Item
Periodic CL Cycle
Auto
Manual
Printing Time
Enter Time
When To Clean
Cleaning Level
Media Usage
Enter Value
When To Clean
Cleaning Level
*
Off
Prevent Sticking
Reduce Print Streak
Restore Settings

The Printer Setup Menu

* indicates default settings.
Using the Control Panel Menu
Parameter Explanation
Performs head cleaning at the most suitable time according to the media
settings.
If the specified time for periodic cleaning is reached during printing, head
cleaning is performed after printing is complete.
Set the interval for periodic cleaning in Printing Time or Media Usage.
When Printing Time is selected, set in Enter Time how long the
accumulated printing time should be before doing head cleaning.
1 to 240 hours
When Media Usage is selected, set in Enter Value how many meters the
length of the media that was used for media feed, such as printing or
Between Pages
drying feed, should be before doing head cleaning.
For When To Clean, set to do head cleaning even when the specified time
Middle Of Page
for periodic cleaning is reached during printing or to do it after the page
being printed is complete and before printing for the next page starts.
Light
Because cleaning is done while printing when Middle Of Page is set, a
decline in print quality or the heads may drag.
Heavy
Cleaning Level sets the strength for head cleaning.
1 to 999
Between Pages
Middle Of Page
Light
High
Neither Auto nor Manual periodic cleaning is done.
On Select whether to do non-stick operations (On) or not (Off) when the
printer is turned on, when printing begins, etc.
*
Off
Off is recommended in normal circumstances. Depending on the type of
media, some may easily stick to the platen. Starting operations with media
stuck to the platen may cause the media to not feed correctly and result in
a paper jam. Set On if this happens. The time for operations takes longer
when On is set.
* We recommend using Off in normal circumstances.
Off
When vertical or diagonal tint streaks appear in the printout, set this to
Light
make the streaks less evident.
Medium
High
Yes
If Yes is selected, the setting content of selected media settings are
returned to the default settings.
No
99