Printing Trim Lines; Adjusting The Platen Gap For Thick Or Thin Paper - Epson pro4880gd Printer Manual

Printing Trim Lines

You can print trim lines on the right edge of your pages (if you're using auto
cut) or on the right and bottom edge (if you're not using auto cut). Follow
these steps:
1. Press the
Menu
2. Press the
Menu
3. Press the button to display
4. Press the
Menu
5. Press the button to highlight
6. Press the
Menu
to .
ON
7. Press the pause button to exit the menu.
You can also specify trim lines from your printer driver software. For
instructions, see page 64 (Mac OS X) or page 82 (Windows).

Adjusting the Platen Gap for Thick or Thin Paper

When you print on unusually thick or thin paper, you may need to adjust
the platen gap setting. Normally, the
to adjust automatically. However, if print quality is not satisfactory when
using very thin or very thick stock, you may need to change this setting
Follow these steps:
1. Press the
Menu
2. Press the
Menu
3. Press the
Menu
setting.
4. Use the and
default setting; you can also choose
.)
WIDEST
Handling Paper and Other Media
button.
PRINTER SETUP
button again to display
PAGE LINE
button.
.
ON
button to save the setting. An asterisk appears next
STANDARD
button.
PRINTER SETUP
button again to display
button.
STANDARD
buttons to change the setting. (
NARROW
49
appears on the display.
.
PLATEN GAP
.
setting allows the printer
appears on the display.
.
PLATEN GAP
is displayed as the current
is the
STANDARD
, , , or
WIDE WIDER
| 49
.