Printing Trim Lines; Adjusting The Platen Gap For Thick Or Thin Paper - Epson Stylus Pro 4000 Printer Manual

4. Press the button until you see the
5. Press and hold the

Printing Trim Lines

You can print trim lines on the right edge of your pages (if you're using auto
cut) or on the right and bottom edge (if you're not using auto cut). Follow
these steps:
1. Press the
Menu
2. Press the
Menu
display
PLATEN GAP
3. Press the button to display
4. Press the
Menu
5. Press the button so that
6. Press the
Menu
to .
ON
7. Press the Pause button to exit the menu.
You can also specify trim lines from your printer driver software. For
instructions, see page 53 (Mac OS X), page 61 (Mac OS 9), or page 82
(Windows).

Adjusting the Platen Gap for Thick or Thin Paper

When you print on unusually thick or thin paper, you may need to adjust
the platen gap setting. Normally, the
to adjust automatically. However, if print quality is not satisfactory when
using very thin or very thick stock, you may need to change this setting
Follow these steps:
1. Press the
Menu
2. Press the
Menu
display
PLATEN GAP
1-39
Handling Paper and Other Media
button for 3 seconds. The paper is cut.
button.
Printer Setup
button again to select the Printer Setup menu and
.
PAGE LINE
button. is displayed as the current setting.
OFF
appears.
ON
button to save the setting. An asterisk appears next
STANDARD
button.
Printer Setup
button again to select the Printer Setup menu and
.
auto cut icon on the LCD.
appears on the display.
.
setting allows the printer
appears on the display.
| 39
.