Figure 39 Removing A Hard Disk Drive - Nortel Contivity 5000 Installing

Chapter 4 Installing option cards and field replaceable units 85
2 If you are replacing the secondary disk drive, save any data that has not yet
been saved to the hard disk from the disk cache.
a
Using the Web GUI, go to the Admin > File System screen and select the
backup disk drive from the Devices list.
b Click on the Prepare button to prepare the hard drive for removal.
3
Remove the front bezel from the chassis (see
top cover" on page
4
Attach the antistatic wrist strap that was shipped with the Contivity 5000 (see
"Attaching the antistatic wrist strap" on page
5
Insert the hard disk drive key into the lock and turn it to the right
The LED displays the letter "U" (for "unlocked").
You may need to push the key in before you can turn it. The key should now
be straight up and down.
Note: Turning the key shuts off the power to the hard disk drive.
6
Grasp the handle on the hard disk drive and pull the drive out of the chassis.

Figure 39 Removing a hard disk drive

2
64).
1
"Removing the front bezel and
68).
(Figure
11010FA
Installing the Contivity 5000
39).