10/100Base Ethernet Interface Card; 1000Base-T Ethernet Interface Card; Figure 46 10/100Base Ethernet Interface Card; Figure 47 1000Base-T Ethernet Interface Card - Nortel Contivity 5000 Installing
Hide thumbs
Also See for Contivity 5000:
- Release notes (54 pages) ,
- Install manual (218 pages) ,
- Installing (158 pages)
Table of Contents
Advertisement
10/100BASE Ethernet interface card
The 10/100BASE Ethernet interface card has a single RJ-45 connector that
provides the signals needed to interface to 10BASE-T and 100BASE-TX Ethernet
equipment.
Figure 46
shows the 10/100BASE Ethernet interface card.
Figure 46 10/100BASE Ethernet interface card
For information about the cables that you can connect to this interface and the
cable pinouts, see
1000BASE-T Ethernet interface card
The 1000BASE-T Ethernet interface card is generally used to connect to Gigabit
Ethernet interfaces on other devices in your network, as well as to provide
increased throughput. This interface card has a single RJ-45 connector.
Figure 47
shows the 1000BASE-T Ethernet interface card.
Figure 47 1000BASE-T Ethernet interface card
For information about the cables that you can connect to this interface and the
cable pinouts, see
"10/100BASE Ethernet LAN port" on page
"1000BASE-T Ethernet LAN port" on page
Appendix A Technical specifications 101
CS260009A
Installing the Contivity 5000
95.
11287EA
94.
Advertisement
Table of Contents
