Figure 7 Replacing The Front Bezel - Nortel Contivity 5000 Installing

3
4

Figure 7 Replacing the front bezel

Insert one of the supplied 1/2-in. truss screws through the bottom hole on each
side of the shelf into the hole in the rack and tighten the screws (see
on page 28).
Replace the front bezel
a
Hold the two handles on the bezel and push it onto the chassis.
b Using the screwdriver, tighten the 2 screws to secure the bezel to the
chassis.
Press here
Chapter 1 Installing the Contivity 5000 chassis 31
(Figure 7).
Figure 4
CS260005C
Installing the Contivity 5000