Figure 24 Removing The Top Cover - Nortel Contivity 5000 Installing

66 Chapter 4 Installing option cards and field replaceable units

Figure 24 Removing the top cover

1
3
Go to the appropriate section in this chapter.
•
•
•
315990-D Rev 00
3
2
Lift the lid 2 or 3 inches and pull it toward you to remove it from the chassis.
The Contivity 5000 system board is now exposed.
location of the option card slots, the DIMM slots, and the fan trays on the
system board.
"Installing and replacing option cards" on page 69
"Installing and replacing DIMMs" on page 76
"Replacing a fan tray" on page 87
10966FA
Figure 25 shows the