Figure 15 Removing The Front Bezel - Nortel Contivity 2600 Getting Started

Figure 15 Removing the front bezel

6
Note that you do not need to turn off the Contivity if you are only removing
the front bezel.
Warning: When handling the Contivity outside of the rack-mount
shelf, do not use the piece with the Nortel Networks logo and the LEDs
as a handle.
Note that the first few times you remove the front bezel it might seem to resist
removal. This is simply because the ball studs and socket clips are new. After a
few times, removal is easier.
To remove the front bezel, you need a Phillips screwdriver.
7 Using the screwdriver, turn each of the two screws on the front bezel a quarter
turn counter-clockwise.
8 Grip the two handles and firmly pull the bezel towards you to unsnap it from
the chassis.
Chapter 3 Rack Mounting 41
Getting Started with the Contivity 2600
CS260015A