Serial Port; Table 21 10/100Base Ethernet Port Pinouts - Nortel Contivity 5000 Installing

96 Appendix A Technical specifications
Table 21

Table 21 10/100BASE Ethernet port pinouts

RD+RD-

Serial port

The system board provides a serial port on the rear of the chassis to enable
out-of-band management. Using the serial port, you can assign the management
IP address and subnet mask to the newly installed gateway (see
"Configuring the management IP interface," on page
The serial cable provided with the gateway is a DB9/DB25-to-DB9/DB25 cable.
This cable provides a crossover connection (transmit-to-receive and
receive-to-transmit). The DB9 connector goes into the gateway and the other DB9
or DB25 connector goes into your workstation.
315990-D Rev 00
provides the 10/100BASE Ethernet port pinouts.
Pin
1
TD+ TD-
12345678
2
3
6
CS260010A
Description
RD +
RD -
TD +
TD -
51).
Chapter 3,