Figure 34 Installing And Removing A Dimm - Nortel Contivity 5000 Installing
Hide thumbs
Also See for Contivity 5000:
- Release notes (54 pages) ,
- Install manual (218 pages) ,
- Installing (158 pages)
Table of Contents
Advertisement
Chapter 4 Installing option cards and field replaceable units 79
Figure 34 Installing and removing a DIMM
Alignment keys
To remove DIMMs, pull back
locking levers and pull out DIMM.
To install DIMMs, pull back locking
levers and push in DIMM.
10 Replace the top cover on the chassis (see
a
Hold the cover at an angle and slide it onto the chassis.
b Using a screwdriver, insert and tighten the 4 screws to secure the cover to
the chassis.
Warning: The Contivity 5000 weighs approximately 50 pounds (23 kg).
Two people are needed to install the gateway in the equipment rack.
Locking lever
CS260019A
Figure 24 on page
66).
Installing the Contivity 5000
Advertisement
Table of Contents
