Attaching The Antistatic Wrist Strap; Figure 26 Location Of The Grounding Jack For The Antistatic Wrist Strap - Nortel Contivity 5000 Installing

68 Chapter 4 Installing option cards and field replaceable units

Attaching the antistatic wrist strap

Nortel Networks ships the Contivity 5000 with an antistatic wrist strap. The
antistatic wrist strap directs the discharge of static electricity from your body to
the chassis of the gateway to avoid damage to sensitive electronic components.
You must wear an antistatic wrist strap on your arm whenever you remove, install,
or handle option cards, DIMMs, power supplies, hard disk drives, and fan trays.
To attach the antistatic wrist strap:
1
2
3

Figure 26 Location of the grounding jack for the antistatic wrist strap

315990-D Rev 00
Caution: Electrostatic discharge can damage hardware. Follow the
procedure in this section to protect your equipment from damage.
Locate the antistatic wrist strap and verify that the cable is attached to the
wrist strap.
Place the strap around your wrist and adjust it to ensure that the metal buckle
inside the strap touches your skin.
Insert the banana plug into the grounding jack at the rear of the chassis
(Figure 26).
Grounding jack
1 2 3 4 5 6
64/100 32/33 64/133
10893EA