Figure 26 Installing And Removing A Dimm - Nortel Contivity 1740 Installing

66 Chapter 4 Installing option cards and DIMMs
5
If you are replacing a DIMM, remove the installed DIMM as follows:
a
b Pull the DIMM up to remove it from the slot.
6
Press down the locking lever on either side of the slot where you plan to
install the new DIMM
7
Place the new or replacement DIMM in the slot
Use the alignment keys to properly position the DIMM in the slot.
8
Press the DIMM firmly into the socket.
9
Pull up the locking lever on either side of the DIMM to snap it into position.

Figure 26 Installing and removing a DIMM

Alignment keys
317086-B Rev 00
Press down the locking lever on either side of the DIMM
(Figure
To remove DIMMs, pull back
locking levers and pull out DIMM.
To install DIMMs, pull back locking
levers and push in DIMM.
26).
(Figure
(Figure 26).
26).
Locking lever
CS260019A