Table of Contents
Advertisement
Setup
IMPORTANT: Remove and discard the protective
plastic sheet that covers the motor and any other
plastic or wrapping on the mower. The electric-start
button has been placed in the battery compartment
for safe delivery. Ensure that you remove it from
the compartment and store in a safe place prior to
assembly.
IMPORTANT: To prevent accidental starting, do
not insert the electric-start button into the electric-
start ignition until you are ready to start the motor.
Charging the Battery Pack
IMPORTANT: The battery pack is not fully charged
when you purchase it. Before using the tool for the
first time, place the battery pack in the charger and
charge it until the LED display indicates the battery
pack is fully charged. Read all safety precautions.
Model and Serial Number
Figure 1 identifies the location of the model and
serial numbers on the product.
1.
Model and Serial Number location
IMPORTANT: With your mobile device, you can scan
the QR code on the serial number decal to access
warranty, parts, and other product information.
Delivery Checklist
Check that the following items have been supplied
correctly.
1.
Grass Bag Assembly
2.
Parts List
3.
Declaration of Conformity
4.
Electric-Start Button
If any items are missing, contact your supplying
Hayter dealer.
©2020 - Hayter Limited
Spellbrook, Bishop's Stortford,
Herts, CM23 4BU
XXXXXXX XX
XX XX XX
CODE NO. XXXXXXXX
SERIAL NO. 4XXXXXXXX
Figure 1
To prevent accidents cut off the long ribbon attached
to the grass bag and discard. Figure 2.
Mounting the Battery Charger
(Optional)
Parts needed for this procedure:
1.
Mounting hardware (not included)
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger. Mount it indoors (such as a garage or
other dry place), near a power outlet, and out of the
reach of children. Refer to Figure 3 for assistance in
mounting the charger.
Slide the charger over the appropriately positioned
hardware to secure the charger in place.
10
Figure 2
101.6 mm
4 in
Figure 3
Printed in UK
All Rights Reserved
Advertisement
Table of Contents
