Setup; Delivery Checklist; Assembling And Unfolding The Handle; Grass Bag Assembly - Hayter Harrier 48 Autodrive VS ES IS Operator's Manual

Table of Contents

Advertisement

SETUP

IMPORTANT: Remove and discard the protective
plastic sheet that covers the engine and any other
plastic or wrapping on the mower.
IMPORTANT: To prevent accidental starting, do not
insert the electric start button into the electric start
ignition until you are ready to start the engine.
Note: The battery will arrive in 'sleep mode'. Refer to
Before operation - When to charge the Battery & How
to Charge the Battery for charging instructions.

Delivery Checklist

Check that the following items have been supplied
correctly.
1.
Engine Handbook
2.

Grass Bag Assembly

3.
Parts List
4.
Declaration of Conformity
5.
Battery
6.
Battery Charger
If any items are missing, contact your supplying Hayter
dealer.
Fig. 1
Fig. 2
To prevent accidents cut off the long ribbon attached
to the grassbag and discard.
(Refer fi g.1)

Assembling and Unfolding the Handle

WARNING: Assembling and unfolding the handle
improperly can damage the cables, causing an unsafe
operating condition.
Do not damage the cables when assembling and
unfolding the handle.
Ensure that the cables are routed inside of the
handle.
If a cable is damaged, contact a Hayter Authorised
Service Dealer.
Unscrew the hand bolts suffi ciently to allow the handle
to pivot. Hold the engine stop lever in towards the
handle and unfold the handle to the operating position,
then release. Tighten both hand bolts to secure in
position.
(Refer fi g.2)
Fig. 3
2
1
11
Grass Bag Assembly
Before fi rst use, assemble the grass bag and frame.
Slide the frame (1) into the grass bag (2), ensuring that
the handle is above the grass bag as shown. Attach
plastic clips (A) to the grass bag frame.
(Refer fi g.3)
Raise the rear defl ector, lower the grass bag and hook
into position. Lower the defl ector to rest on the grass
bag.

Prevent Engine Damage

To prevent engine damage the engine is shipped
without oil or fuel. The engine must be fi lled with
the correct grade of oil and fuel before starting the
engine.
A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

476a

Table of Contents