Folding The Handle - Hayter CODE373A Operator's Manual

10. Start the motor and run it for a few minutes to
dry the underside of the machine to prevent it
from rusting.
11. Shut off the motor and allow it to cool before
storing the machine in an enclosed area.

Folding the Handle

WARNING: Folding or unfolding the handle
improperly can damage the cables, causing an
unsafe operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an Authorised
Service Dealer.
IMPORTANT: Route the cables to the outside of the
handle hinge as you fold the handle.
1. Remove the electric-start button (1). Figure 22.
2. Loosen the 2 handle bolts (2). Figure 22.
3. Fold the handle by rotating it forward (3). Figure
22.
3
©2021 - Toro U.K. Limited
Spellbrook, Bishop's Stortford,
Hertfordshire, CM23 4BU
1
2
Figure 22
19
Original Instructions (EN)
Printed in UK
All Rights Reserved