Table of Contents
Advertisement
Symbols
The following symbols are used in this user's guide:
Warning
Warnings indicate conditions that, if not observed, can cause personal injury.
Caution
Cautions warn the user about how to prevent damage to hardware or loss of data.
Note
Notes call attention to important information that should be observed.
Connector Type
Describes the connector that must be used with the Qseven
carrier board.
Link to connector layout diagram
This link icon is located in the top left corner of each page. It provides a direct link to the connector layout diagram on page 10 of this document.
Copyright Notice
Copyright © 2014, congatec AG. All rights reserved. All text, pictures and graphics are protected by copyrights. No copying is permitted without
written permission from congatec AG.
congatec AG has made every attempt to ensure that the information in this document is accurate yet the information contained within is
supplied "as-is".
Copyright © 2014 congatec AG
®
2.0 evaluation carrier board, not the connector found on the Qseven
QEV2m11
®
evaluation
4/49
Advertisement
Table of Contents
Need help?
Do you have a question about the conga-QEVAL/Qseven 2.0 and is the answer not in the manual?
Questions and answers