Removing The Take-Up Roll - Epson SureColor SC-S30600 User Manual

SC-S30600 Series User's Guide
E
Lower the tension bar.
F
Press the d button to feed the media until the
take up roll core begins to turn.
c
Important:
The auto take-up reel unit will not work if the
tension bar is raised.

Removing the Take-up Roll

The procedure for removing media varies depending on
whether you are using the installed auto take-up reel
unit or the optional auto take-up reel unit for heavy
media.
Follow the steps below when using the supplied auto
take-up reel unit.
When the Heavy Roll Auto Take-up Reel Unit is
installed U "Using the Optional Heavy Roll Auto
Take-up Reel Unit" on page 40
When the Standard Auto Take-up
Reel Unit Is Installed
This section describes how to remove media from the
take-up reel.
!
Caution:
Two persons are required when handling media
over 20 kg.
Basic Operations
A
Cut the media and roll the cut end onto the
take-up reel.
"Cutting Media" on page 34
U
B
To prevent the media from sliding off the roll,
support the roll at its left end.
C
Loosen the left roll core holder fixing screw and
remove the roll core holder from the roll.
D
Lower the roll onto the roll support.
E
To prevent the media from sliding off the roll,
support the roll at its right end.
F
Loosen the right roll core holder fixing screw and
remove the roll core holder from the roll.
39