Understanding The Display - Epson SureColor SC-S30600 User Manual

SC-S30600 Series User's Guide
K
# button (maintenance button)
Pressing this button displays the Maintenance
menu, which contains such items as Nozzle Check,
Cleaning, Head Washing, Head Maintenance, and
Waste Ink Counter. This button is disabled during
printing.
"The Maintenance Menu" on page 80
U
L
W button (pause/cancel button)
❏
The printer enters pause status if this is pressed while
printing. To release the pause status, press the W
button again, or select Pause Cancel on the screen
and then press the Z button. To cancel print jobs
being processed, select Job Cancel on the screen and
then press the Z button.
❏
Pressing this button when menus are displayed closes
the menus and returns the printer to ready status.
M
button (media feed button)
❏
When the printer is in the ready state, you can feed the
media to the cut position by pressing this button and
then Z.
"Cutting Media" on page 34
U
❏
When printing is in progress, you can use this button
to adjust media feed.
"Feed Adjustment (Manual Feed Adjustment)" on
U
page 47

Understanding the Display

A
Messages
Displays the printer's status, operation, and error
messages.
"When a Message is Displayed" on page 85
U
B
Heater temperature
Introduction
From left to right, this display shows the temperature
settings for the pre-heater, platen heater, and after
heater. The thermometer icons give a rough indica-
tion of the current temperatures of the heaters.
: The heater has reached the selected
temperature.
: The heater has not reached the selected
temperature.
C
Media info
❏
From left to right, this display shows the selected
media, platen gap, media width, and media
remaining.
❏
If a media setting bank number created with this
printer is selected as the print media, the number
(from 1 to 30) will be displayed. When RIP Settings is
selected, 0 will be displayed.
❏
The selected platen gap is shown as follows.
: 1.5
: 2.0
: 2.5
❏
The media remaining is not displayed if Off is selected
for Remaining Setup in the Media Remaining menu.
"The Media Setup Menu" on page 74
U
D
Ink cartridge status
Displays the approximate level of remaining ink and
the current status. When ink runs low or an error
occurs, the display changes as shown below.
Normal
1 Status indicators
The ink cartridge status is indicated as follows.
: Ready to print. The height of the
13
Warning or error
indicator changes with the level of ink
remaining.
1
2