Details Of The Menu; The Media Setup Menu - Epson SureColor SC-S30600 User Manual

SC-S30600 Series User's Guide

Details of the Menu

The Media Setup Menu

The Media Setup menu can be accessed directly by pressing the M button.
indicates default settings.
Media Remaining
Item
Remaining Setup
Length
Remaining Alert
Print Remaining Length
Select Media
Parameter
RIP Settings
1 to 30 (media setting bank number)
Customize Settings
Item
Current Settings
Using the Control Panel Menu
Parameter Explanation
On Choose On to display and record, or Off to not display and not record, the
amount of media remaining. Length, Remaining Alert, and Print
Off
Remaining Length options are available when On is selected. The display
panel shows the amount of media remaining based on the value selected
for Length and the amount of media used during printing.
5.0 to 99.5 m (15 to Enter a value for overall roll length between 5.0 and 99.5 m (15 to 300 ft).
300 ft) You can set in 0.5m (1ft) increments.
1 to 15 m (4 to 50 ft) An alert will be displayed if the amount of media remaining reaches this
length. Choose from values between 1 and 15 m (4 and 50 ft). You can set in
0.5m (1ft) increments.
Print Use Print Remaining Length to print the amount of media remaining on
the current roll before replacing it with another type of media. You can
then enter this number as the media the length the next time the roll is
used.
Explanation
Choose the media settings used for printing.
If RIP Settings is selected, the media settings selected in the software RIP
will be used.
Select a number between 1 and 30 to use the settings in the
corresponding media setting bank. Use Customize Settings to create
media setting banks.
Parameter Explanation
Change settings for currently selected media. The options available
depend on whether RIP Settings or a media setting bank is selected. More
information on the options available can be found below in the entries for
RIP Settings and media setting banks 1 to 30.
74